Eagle Electronics Cuda 240 S/GPS Manuale Utente

85

previous page display. The waypoint is saved and automatically given a
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the plotter and in the waypoint list.

This feature sets a waypoint at the current position after taking several
position readings and averaging them. This boosts waypoint position
accuracy by helping to eliminate errors caused by atmospheric condi-
tions and other factors.

1. Press 

|

↓ to 

|

.

2. Press 

↓ or ↑ to 

|

|

.

3. Wait while the unit takes points to average for the position. (The greater
the number of points, the greater the accuracy.) When the desired number
of points accumulates, press 

 to create and save the waypoint.

4. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing 

|

 or you can edit the waypoint.

This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position must be se-
lected from your waypoint list.

1. Press 

|

↓ to 

|

.

2. Press 

↓ to 

|

|

.

3. Press 

↓ to 

|

. Use 

↑ and ↓ to select a waypoint.

When the point has been selected, press 

 and the point's position

appears as the reference position.

4. Press 

↑ to 

|

. Press 

↑ or ↓ to change the first character,

then press 

→ to the next character and repeat until the distance is cor-

rect. Press 

.

5. Press 

↓ to 

|

. Press 

↑ or ↓ to change the first character,

then press 

→ to the next character and repeat until the bearing is cor-

rect. Press 

.

6. Press 

↓ to 

|

. The Edit Waypoint menu appears. You can

simply save the new projected waypoint by pressing 

|

 or you

can edit the waypoint. (Press 

|

 if you want to immediately be-

gin navigating to the new waypoint.)

Delete a Waypoint
To delete a waypoint from the waypoint list: press 

|

|

↓ to way-

point name|

|

→ to 

|

|

← to 

|

. To return to the pre-

vious page, press 

EXIT|EXIT

.