York YK-ZCU4x0-0 Manuale Utente

System Manager/Zone Coordinator User’s Manual

51

428516-YUM-B-0908

4. Press the button for the e-mail parameter you want to change. The button label 

describes the current setting. When you press the button, the appropriate screen 
appears, allowing you to change the value. Table 13 lists these parameters and 
their ranges or possible selections. 

5. Make the e-mail destination changes and press OK. The E-mail Setup screen 

returns, reflecting the changes you made.

To configure a text message as an alarm destination:

1. From the Home screen of the System Manager or Zone Coordinator, press the 

Alarm Summary icon. The Alarm Summary screen appears.

2. Press the Alarm Setup button. The Alarm Setup screen appears.

Enter a valid e-mail address up to 30 characters

1

1.

A full keyboard screen appears, allowing you to enter an e-mail address. Press OK to save the 
e-mail address; remember to include the @ symbol. The e-mail Setup screen returns, indicating 
the address you entered.

Specify SMTP server as a host name (up to 30 
characters) or enter an IP address

2

2.

A full keyboard or keypad appears, allowing you to enter the host name or IP address. Press 
OK to save the name/address. The e-mail Setup screen returns, indicating the name/address 
you entered.

Select one of these options:
• 

Service, Service Priority and Critical

• 

Service Priority and Critical

• Critical
• None

0-65535

Yes or No

3.

This parameter appears only if Authentication Needed = Yes.

Enter SMTP User Name up to 24 characters

Enter SMTP Password up to 20 characters. After 
you enter the password, its characters appear as 
asterisks (*) on the setup screen.