York YK-ZCU4x0-0 Manuale Utente
System Manager/Zone Coordinator User’s Manual
83
428516-YUM-B-0908
Dial-up Communication Procedures
Dial-up communication procedures include:
•
Creating a dial-up connection
•
Dialing up the System Manager or Coordinator
These procedures apply to System Manager and Coordinator models with an
internal modem. (External modems are not supported.) The other requirements are:
internal modem. (External modems are not supported.) The other requirements are:
•
The internal modem in the System Manager or Coordinator must be set up
properly. For details, see Setting up a Modem.
properly. For details, see Setting up a Modem.
•
Two analog telephone lines must be available, one at the System Manager/
Coordinator and one at the connecting computer
Coordinator and one at the connecting computer
•
The connecting computer must have a modem (internal or external) configured
to match the baud rate set for the modem in the System Manager or
Coordinator
to match the baud rate set for the modem in the System Manager or
Coordinator
When System Manager/Coordinator meets these requirements, you can create a
dial-up connection and use this connection to enable remote access to the user
interface with the Internet Explorer Web browser.
dial-up connection and use this connection to enable remote access to the user
interface with the Internet Explorer Web browser.
Creating a Dial-up Connection
To create a dial-up connection:
1. Log on the computer and go to Control Panel > Network Connections.
2. Start the New Connection Wizard and display the Network Connection Type
window.
Figure 60: New Connection Type Window