York YKSMU2x0-0 Manuale Utente
System Manager/Zone Coordinator User’s Manual
49
428516-YUM-B-0908
Configuring Pager as Alarm Destination
To configure a pager as an alarm destination:
1. From the Home screen of the System Manager or Zone Coordinator, press the
Alarm Summary icon. The Alarm Summary screen appears.
2. Press the Alarm Setup button. The Alarm Setup screen appears.
3. Press the Pager Destination button. The Pager Setup screen appears.
4. Press the button for the Pager parameter you want to change. The button label
describes the current setting. When you press the button, the appropriate screen
appears allowing you to change the value. Table 12 lists these parameters and
their ranges or possible selections.
appears allowing you to change the value. Table 12 lists these parameters and
their ranges or possible selections.
Table 12: Pager Setup Parameters (Part 1 of 2)
Parameter
Parameter Range/Selections
Pager Phone Number
Enter a value up to 24 characters
1
Pager Service Access Number
Enter a value up to 24 characters
Alarm Priority Required to Send Message to Pager
Select one of these options:
•
•
Service, Service Priority and Critical
•
Service Priority and Critical
• Critical
• None
• None
Max Text Characters
1-255
Figure 32: Pager Setup Screen
Pager Setup
Pager Phone Number:
Pager Service Access Number:
Alarm Priority Required to Send
Message to Pager:
Max Text Characters:
Even
FI
G
:P
g
rS
cr
n
Databits:
Parity:
Stop bits:
7
0
1
None