York YKSMU2x0-0 Manuale Utente

System Manager/Zone Coordinator User’s Manual

91

428516-YUM-B-0908

To back up the current configuration:

1. From the Home screen, press the Setup icon. The Setup screen appears.

2. If you are at the System Manager, press the System Manager button. The 

System Manager Setup screen appears. If this is a Zone Coordinator, press the 
Coordinator button. The Zone Coordinator Setup screen appears.

3. Press the Restore Setup Information button. The Restore Setup Information 

screen appears.

4. Press the Backup Restore Setup Information button. The Backup/Restore 

screen appears, describing the three options.

5. Press the Backup button. The Backup to USB Flash Drive screen appears.

6. If you are backing up the System Manager, connect a USB flash drive to its 

USB port.

If you are backing up a Zone Coordinator, go to the location of the coordinator.  
(You cannot back up a coordinator to the System Manager’s USB flash drive.) 
Connect a USB flash drive to the coordinator’s USB port.

7. Press Continue. The system is backed up to the flash drive. The process takes 

no longer than 1 minute to complete.

While the backup is in progress, the message Backup in Progress - Please 
wait appears. After the backup has completed successfully, a confirmation 
message appears. If the backup failed, a message appears to describe what you 
can do.

FI

G:Bc

k

to

USBSc

rn

Please connect a USB flash drive to the System Manager 

to be backed up, and then select Continue.

The configuration for the System Manager will be stored on the 

USB flash drive, under a directory with the model name and

dip switch setting. The process may take around a minute. 

Continue