NEC MultiSync V461 Manuale Utente

English

BRIGHTNESS

Adjusts the overall image and background brightness.

CONTRAST

Adjusts the image brightness in relation to the input signal.
NOTE: sRGB picture mode is standard and cannot be changed.

SHARPNESS

Adjusts the crispness of the image.

BLACK LEVEL

Adjusts the image brightness in relation to the background.

TINT

Adjusts the tint of the screen.

INPUT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 only

COLOR

Adjusts the color depth of the screen.

INPUT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 only

COLOR TEMPERATURE

Adjusts the color temperature of the entire screen. A low color temperature will make the screen reddish.
A high color temperature will make the screen bluish.

USER COLOR

Select the USER COLOR SETTING feature ON/OFF.

USER COLOR SETTING

Adjusts the levels of the Red, Yellow, Green, Cyan, Blue and Magenta.
Note: The sRGB picture mode is standard and cannot be changed.
It can be adjusted only when USER COLOR is selected ON.

GAMMA SELECTION

Select a display gamma for best picture quality.

 NATIVE

Gamma correction is handled by the LCD panel.

 2.2

Typical display gamma for use with a PC.

 2.4

Good for video (TV, DVD, etc.)

 S GAMMA

Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of the image.
NOTE: sRGB picture is standard and cannot be changed.

NOISE REDUCTION

Adjusts the amount of noise reduction.

INPUT S-VIDEO, VIDEO1, VIDEO2 only

FILM MODE

Selects Film mode function. ( AUTO)

INPUT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 only

This mode is better suited for movies, which is converted 24 Frames/sec source to DVD Video.

PICTURE RESET

Resets the all settings within the PICTURE menu back to factory setting.

AUTO SETUP

Press “SET” button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase,

INPUT VGA, RGB/HV only

white level and black level.

AUTO ADJUST

Selecting ON when changing the timing, the horizontal position, vertical position and clock phase will adjust

INPUT VGA, RGB/HV only

automatically.

H POSITION

Controls the horizontal position of the image within the Display area of the LCD.

ALL inputs except DVI, HDMI

Press + to move right. Press - to move left.

V POSITION

Controls the vertical position of the image within the Display area of the LCD.

ALL inputs except DVI, HDMI

Press + to move up. Press - to move down.

CLOCK

Press + to expand the width of the image on the right of the screen.

INPUT VGA, RGB/HV only

Press - to narrow the width of the image on the left.

CLOCK PHASE

Adjusts the visual “noise” on the image.

INPUT VGA, RGB/HV only

ZOOM MODE

You can select “FULL”, “NORMAL”, “DYNAMIC”, “CUSTOM” and “REAL”.
NOTE: DYNAMIC is INPUT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 only.
Selecting DYNAMIC expands 4:3 picture to fill the screen. Some of the image is lost due to expansion.
Selecting “REAL” image will be displayed 1 by 1pixel.

CUSTOM ZOOM

“CUSTOM ZOOM” will be selected when you select “CUSTOM” on the screen “ZOOM” mode.

ZOOM

Expands the horizontal and the vertical size simultaneously.

H ZOOM

Expands the horizontal size only.

V ZOOM

Expands the vertical size only.

H POSITION

Moves to the right with + button. Moves to the left with - button.

V POSITION

Moves up with + button. Moves down with - button.