Planar m46L Manuale Utente
6
Sele
ctin
g a
Source
Selecting a Source
In this guide, a source is any type of picture. It might be an ana-
log computer image, a video processor, a VCR or DVD, or it
might be a DVI picture from a computer.
log computer image, a video processor, a VCR or DVD, or it
might be a DVI picture from a computer.
Selecting the Source Automatically
1 Press
SOURCE
on the remote. The
m40L/m46L goes to the next connector
that has a valid picture on it and dis-
plays that picture.
that has a valid picture on it and dis-
plays that picture.
2 If you want to select a different source,
press
SOURCE
again to select the next
connector (that has a valid picture on
it) and display the picture.
it) and display the picture.
Note:
If a connector does not have a valid source, the m40L/m46L
briefly displays that it has scanned that connector and then proceeds
to the next connector.
to the next connector.
Selecting the Source Manually
1 Press
FREQ
/
PHASE
on the remote. The m40L/m46L dis-
plays the
PICTURE
menu for the current source.
2 With
SOURCE
highlighted, press the + button to open the
SOURCE
submenu.
Note:
The
SOURCE
submenu displays to the right of the
PICTURE
menu.
3 In the
SOURCE
submenu, use the up/down arrows keys to
select the desired source.
4 When the desired source is selected, press
ENTER
. The
PICTURE
menu changes to display the settings for that
source.
When the Source is Familiar to m40L/m46L
When a "new" source is selected, the m40L/m46L looks through
a list of the last 10 picture types it used. If the “new” source is
like a previous one in this list (resolution, number of active lines,
etc.), the m40L/m46L uses the stored data. This saves time, and
the picture is displayed faster without going through adjust-
ments, which are visible on the screen.
a list of the last 10 picture types it used. If the “new” source is
like a previous one in this list (resolution, number of active lines,
etc.), the m40L/m46L uses the stored data. This saves time, and
the picture is displayed faster without going through adjust-
ments, which are visible on the screen.
Best Way to Change a Source
The best way to select a source is to recall a configuration your
service provider has created for you. See the Installation & Con-
figuration Guide CD for more detailed information.
service provider has created for you. See the Installation & Con-
figuration Guide CD for more detailed information.
1 On the remote, press
SAVE
. The
RECALL
menu displays.
2 Using the arrow keys, scroll to one of the numbered con-
figurations your service provider has created for you.
3 Press
ENTER
to display the
RECALL
SLOT
menu.
4 With the
RECALL
NOW
line selected, press
ENTER
. If the top
of the menu displays “Current”, the source is identical to
the settings stored in the memory slot.
the settings stored in the memory slot.
Picture
Source
Digital
Colorspace
RGB
Vertical Frequency (frame locked)
60Hz
Horizontal Frequency
50.00kHz
Horizontal Resolution
1366
Vertical Resolution
768
Sharpness
4