Teledyne 5499 Manuale Utente

 
APIcom Instruction Manual 

 

 

The default properties should work for most standard modems. If properties were changed, clicking on 

 will reset all parameters to the defaults. Notice that the commands include the “AT” 

command prefix. When APIcom establishes a non-Windows modem connection it sends the commands 
to the modem in the following order: 

 

Reset command (e.g. “ATZ”) 

 

Wait for OK response (e.g. “OK”) 

 

Initialization command (e.g. “AT &F E0 M0 Q0 V1”) 

 

Wait for OK response (e.g. “OK”) 

 

Dial command + telephone number (e.g. “ATDT456 7890”) 

 

Wait for connect response (e.g. “CONNECT”) 

When APIcom terminates a non-Windows modem connection it sends the commands to the modem in 
the following order: 

 

Wait 1 second 

 

Data mode command (e.g. “+++”) 

 

Wait for OK response (e.g. “OK”) 

 

Hangup command (e.g. “ATH0”) 

 

Wait for OK response (e.g. “OK”) 

 

Reset command (e.g. “ATZ”) 

 

Wait for OK response (e.g. “OK”) 

The following table describes the modem type properties. 

Property Description 
Name 

A user-defined name for the modem. Should be something descriptive, such as 
the manufacturer and model name. For user interface only. 

05499 Rev. A 

2-15