Planar PT1503NT Manuale Utente
9
OSD Exit Option
Use the OSD Exit item to close the OSD menu.
The OSD will close by itself if left inactive.
Note:
1. No
Video
When the monitor is ON and there is no
Video signal received, the following
message will be displayed.
Video signal received, the following
message will be displayed.
2.
Signal out of monitor’s supported range
(Please refer to Addendum)
When the frequency range of the signal is out of the monitor’s specifications,
the display will show the following message on two cases:
(Please refer to Addendum)
When the frequency range of the signal is out of the monitor’s specifications,
the display will show the following message on two cases:
Case 1:
The incoming frame rate is higher than
75Hz.
In this case, the screen display may not be
centered and a warning message appears.
Case 2:
The incoming resolution is higher than
1024x768.
In this case, the video data will be turned off
and a warning message appears at center.