Garmin G1000H Manuale Utente

190-01255-00  Rev. B

118

Pressing the 

BACK Softkey 

returns to the top-level softkeys. 

ALERTS 

ALERTS 

 

BACK 

BKSP 

 

IDENT 

7 

6 

5 

4 

3 

2 

1 

0 

STBY 

ON 

ALT 

VFR 

CODE 

IDENT 

BACK 

XPDR 

IDENT 

Pressing the 

BACK Softkey returns to the mode selection softkeys. 

GND 

Mode selection can be automatic (Ground and Altitude Modes) or manual (Standby, ON, and Altitude Modes).

The STBY, ON, and ALT Softkeys can be accessed by pressing the XPDR Softkey.

Press the XPDR Softkey to display the Transponder Mode Selection Softkeys.

Press the desired softkey to activate the transponder mode.

Ground Mode is normally selected automatically when the aircraft is on the ground. The transponder

powers up in the last mode it was in when shut down. Ground Mode can be overridden by pressing any one
of the Mode Selection Softkeys. A green GND indication and transponder code appear in the mode field of
the Transponder Data Box. In Ground Mode, the transponder does not allow Mode A and Mode C replies,
but it does permit acquisition squitter and replies to discretely addressed Mode S interrogations.

When Standby Mode has been selected on the ground, the transponder can be returned to Ground Mode

by pressing the GND Softkey.