Muratec IC-F60 Manuale Utente
30
4
BIIS OPERATION
4
■ Transmitting an SDM
D
D General
The short data message, SDM, can be sent to an individual station
or group stations. Also, 8 SDM memory channels are available and
the messages can be edited via PC programming.
or group stations. Also, 8 SDM memory channels are available and
the messages can be edited via PC programming.
D
D Transmitting an SDM
q While in the standby condition, push [P1] (Digital), then push
[
]/[
] to select the desired station/group code.
w Push [P1] (Digital) again, then push [
]/[
] to select the de-
sired SDM.
Or, you can select the desired SDM using [Status Up]/[Status
Down] key directly.
Down] key directly.
e Push [P0] (Call) or [PTT]* to transmit the SDM to the selected
station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby con-
• 2 beeps will sound and the transceiver returns to the standby con-
dition automatically when the transmission is successful.
SDM is displayed.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 30 (1,1)