Garmin GPSMAP 8000 Manuale Utente

If you have wired your vessel's speakers into zones, you can 

enable needed zones and disable unused zones.

From the media screen, select Menu > Media Menu > 

Audio Levels > Enable/Disable Zones.

Select a zone.

From the media screen, select 

.

If necessary, select Select.

Before you can scan VHF channels, you must set the source to 

VHF.
You can monitor VHF channels saved as presets for activity and 

automatically switch to an active channel.

From the VHF media screen, select Scan.

NOTE: Your media player must support VHF radio to use this 

feature.

From the VHF source page, select Menu > Media Menu > 

Squelch.

Use the slider bar to adjust the VHF squelch.

When you have a Garmin Meteor 300 and SiriusXM Connect 

Tuner installed and connected to the chartplotter, you may have 

access to SiriusXM satellite radio, depending on your 

subscription.

Before you can activate your SiriusXM subscription, you must 

have the radio ID of your SiriusXM Connect Tuner.
You can locate the SiriusXM Radio ID on the back of the 

SiriusXM Connect Tuner, on the back of its packaging, or by 

tuning your chartplotter to channel 0.

Select an option:
• Select Media > Source > SiriusXM.
• Select Settings > System > System Information.

If necessary, tune to channel 0 or 1.
The SiriusXM radio ID does not include the letters I, O, S, or 

F.

When the SiriusXM tuner is properly installed and turned on, 

you can hear a preview channel on SiriusXM channel 0 or 1.

Contact SiriusXM listener care by phone at (866) 635-2349 

or go to 

United States. Contact SiriusXM by phone at (877) 438-9677 

or go to 

 to subscribe in Canada.

Provide the necessary information to the SiriusXM 

representative or on the web site to activate your SiriusXM 

Connect Tuner.
Subscription Updated appears on the chartplotter display 

when it is in SiriusXM mode and the tuner has received the 

activation message.

If the service is not activated within the hour, go to 

 or contact SiriusXM by phone at 

1-855-MYREFRESH (697-3373).
NOTE: For the SiriusXM Connect Tuner to receive the 

activation message, it must be powered on and receiving the 

SiriusXM signal.

SiriusXM radio channels are grouped in categories. You can 

select the category of channels that appear in the channel 

guide.

Select Media > Category.

Select a category.

You can save your favorite channels to the presets list.

Select Media.

Select the channel you want to save as a preset.

Select Menu > Presets > Add Current Channel.

Select Media > Menu.

Select   or  .

From the media screen, select Browse > Parental > 

Unlock.

Enter your passcode.
The default passcode is 0000.

Before you can set parental controls, the parental controls must 

be unlocked.
The parental control feature allows you to limit access to any 

SiriusXM channels, including those with mature content. When 

enabled, the parental control feature requires you to enter a 

passcode to tune to the locked channels.

Select Browse > Parental > Lock/Unlock.
A list of channels appears. A checkmark indicates a locked 

channel.
NOTE: When you view the channels after setting parental 

controls, the display changes:
•

 indicates a locked channel.

•

 indicates an unlocked channel.

Before you can change the passcode, the parental controls 

must be unlocked.

From the media screen, select Browse > Parental > 

Change Pin.

Enter your passcode and select Done.

Enter a new passcode.

Confirm the new passcode.

This process deletes all the settings information you have 

entered. When you restore the parental control settings to their 

default values, the passcode value is reset to 0000.

From the media menu, select Installation > Factory 

Defaults.

Select Yes.

Before you can clear all locked channels, the parental controls 

must be unlocked.

From the media screen, select Browse > Parental > Clear 

All Locked.

Enter your passcode.

From the media screen, select Menu > Media Menu > 

Installation > Set Device Name.

Enter a device name.

28

Media Player