3M 48N Manuale Utente
Operating QUESTempº 48N
Setup
9
Selecting Setup parameters
1. From the main menu, select Setup by pressing the I/O Enter key. Using
the Up/Down Arrow keys, select the settings in steps 2-6.
Figure 1-11: Selecting temperature setting and setup
2. For the Time and Date settings, once selected, press I/O Enter key to
move to the update field. (An underline will appear under the first field.)
Press Up/Down Arrows to change the number/month. Press I/O
Enter key to toggle through each field. Repeat as necessary until all
values are selected.
values are selected.
3. For the Temperature setting, either Fahrenheit or Celsius will appear.
Press the Up/Down Arrow to select and I/O Enter key to change.
Figure 1-12: Selecting temperature setting
4. For the Language setting, once selected, press I/O Enter key. To select a
language, press Up/Down Arrow keys. Once selected, press Run/Stop
key to return to setup parameters.
5. For the Log Rate, once selected, press I/O Enter key.
Repeatedly press I/O Enter keys to select either the Log Rate Event or
a Log Rate interval (for data logging; e.g. “5”).
a Log Rate interval (for data logging; e.g. “5”).
Optional: changing Next Event field. Events are numbered starting
at 1 and incrementing. The number may be increased to simulate
at 1 and incrementing. The number may be increased to simulate
skipping events. This may be useful if the events represent locations
and the starting location is somewhere other than 1.
and the starting location is somewhere other than 1.
Figure 1-13: Selecting log rate with event log
6. For the Index setting, once selected press I/O Enter key. Press
Up/Down Arrow keys to select: “---” (which is equivalent for no index),
ACGIH, PHEL, or Flag.
7. Exit Setup by pressing the Run/Stop key.
Next event number
*To increase, press up arrow key (used
*To increase, press up arrow key (used
to simulate skipping an event.)
Event
Example of setting Log Rate
to Event Log
to Event Log
Operating:
Setup
Temperature setting – press I/O Enter key
to switch between values.
to switch between values.
Press I/O Enter key to select Setup.