Garmin 160C Manuale Utente

O

PERATING

 I

NSTRUCTIONS

 > 

T

HE

 K

EYPAD

 

AND

 S

IMULATOR

 M

ODE

If you are turning on your Fishfinder 160C for the first time, use the 

following procedure. If you have already turned on your Fishfinder, 

and you are just familiarizing yourself with the basic functions, 

please go to “Using the Keypad” on this page.

1.  Press and hold the 

Power/Backlight key until the Fishfinder 

powers on. If the Fishfinder fails to turn on, verify that the 

wiring adapter is properly connected in the back of the 

Fishfinder, the Red and Black wires are connected to the 

correct polarity, and that the 2-Amp fuse is installed and 

not blown. If the Fishfinder does not detect a transducer, it 

automatically enters Simulator mode.

You can use Simulator mode to practice and learn the operation 

of the Fishfinder. If the Fishfinder does not detect a transducer, it 

automatically starts in Simulator mode. 
While in Simulator mode, the Fishfinder shows a bottom scene, 

and you can control the Fishfinder (except the Gain and Auto Gain 

options). If no keys are pressed for two minutes, the Fishfinder 

automatically resets to default settings while in Simulator mode.
To exit Simulator mode, turn off the Fishfinder. 

ENTER

MENU

  The up and down Arrow keys are used to 

select items on the Adjustment Bar and Setup 

menu.

  The left and right Arrow keys are used 

to quickly cycle through Adjustment Bar 

settings.

  The ENTER key opens items in the 

Adjustment Bar and Setup Menu.

  The MENU key opens and closes the 

Adjustment Bar.

  The POWER key turns the unit on or off 

and activates the backlight. Press and hold 

to turn the unit on or off. Press briefly and 

release to activate the backlight. To change 

the backlight level, press the POWER key 

repeatedly to cycle between off, user level, 

and high.