Garmin GPSMAP 2108 Manuale Utente
GPSMAP
®
2008/2108 Owner’s Manual
27
C
onfigUring
The
U
niT
4. Select
Off
to disable, or select
On
to enable
the NMEA output sentence.
Posn. Precision—adjust the number of digits (
Two
Digits
,
Three Digits
, or
Four Digits
) to the right of
the decimal point for transmission of NMEA output.
Waypoint—select how the unit outputs waypoint
identifiers (
Names
or
Numbers
).
Setting Alarms
You can set the unit to sound an audible alarm when
certain conditions are met. By default, all alarms are
turned off.
To set an alarm:
1. From the Home screen, select
Configure
>
Alarms
.
2. Select an alarm category (
Navigation
,
System
, or
Sonar Warnings
).
3. Select an alarm.
4. Select
On
to turn the alarm on, and then use
the
ROCKER
to specify alarm information.
Press left or right
on the
ROCKER
to move fields.
Press up or down
on the
ROCKER
to increase or
decrease.
Setting Navigation Alarms
To set a navigation alarm, from the Home screen,
select
Configure
>
Alarms
>
Navigation
.
Anchor Drag—set an alarm to sound when you
exceed a specified drift distance.
Arrival—set an alarm to sound when you are within
Arrival—set an alarm to sound when you are within
a specified distance or time from a destination
waypoint.