Garmin GPSMAP 2108 Manuale Utente

a

ppendix

Acquisition Times:
   Warm Start: Approx.15 seconds
   Cold Start: Approx. 45 seconds
   AutoLocate: Approx. 2 minutes
Update Rate: 1/second, continuous 
GPS Accuracy:
   Position: <33 feet (10 meters), 95% typical
   

Velocity: 0.1 meters/sec steady rate

WAAS Accuracy:
   Position: <10 feet (3 meters), 95% typical
   Velocity: 0.1 meters/sec steady rate
   Dynamics: 6gs

Power Source: 10-36 ± 0% VDC
Usage: 7.5 Watts max at 12 VDC 
Fuse: AGC/3AG - 3.0 Amp

  NOTE:ThE RJ45 port (Garmin Network) is 

used for Garmin Network devices such as Radar 

and GSD 22. The BNC coaxial cable port is to

connect to GPS module for satellite positioning, 

of which frequency range is 1.57542 GHz. Both 

ports operate below 60VDC and can not work

with non Garmin devices.

The unit uses an on-screen message system to alert 

you to unit operating characteristics. When a message 

appears, press 

 to acknowledge the message.

Accuracy Alarm—the GPS accuracy has fallen 

outside of user-set value.
AIs: Dangerous Target—shows the MMSI 

(Maritime Mobile Service Identity) of the dangerous 

target.
Alarm Clock—the alarm clock has sounded.
Anchor Drag Alarm—you have drifted out of the 

specified distance range.
Antenna Input is shorted—some part of the antenna 

wiring is contacting the chassis.
Arriving At [Waypoint Name]—you arrived at the 

destination waypoint. You can stop Navigation when