Mustang Survival MD3091 Manuale Utente

1.  Tie the conversion cap lanyard through the 

eyelet located within the front slash entry 
(Figure 39). Allow enough length such that 
the manual cap can be stowed in the interior 
pocket located below the inflator inside the 
slash entry (Figure 39).

2.  Position the conversion cap over the hydrostatic 

water inlet valve (Figure 40).

3.  Secure the conversion 

cap to the hydrostatic 
water inlet by 
applying pressure to 
the cap at the metal 
clip until it locks in 
place (Figure 41).

1.  To remove the conversion cap, open the front slash 

entry.

2.  Reach above the inflator to find the conversion cap 

lanyard. Follow the lanyard to the conversion cap.

3.  Push the fabric of the slash entry behind the water 

inlet valve (Figure 42).

4.  Firmly pull the conversion cap lanyard horizontally 

across the chest.

5.  Place the conversion cap in the manual conversion 

cap pocket located inside the front slash entry 
when not in use.

6.  Visually confirm the conversion cap has been removed from the valve 

opening.

Before each use, review the Readiness Checklist.

After each use, deflate, re-arm, and repack the LP – see:
•

Deflating

•

Re-arming

•

Repacking

Visually inspect the LP prior to use to ensure:
•

LP is properly armed

FiGURE 39

FiGURE 40

FiGURE 41

FiGURE 42

Compact Tactical LP 

 

13