Siemens M200D Manuale Utente
Functions
3.7 System monitoring
M200D AS-Interface Basic
Manual, 03/2009, A5E01668085-01
Manual, 03/2009, A5E01668085-01
35
Shutdown with restart
● Causes the motor and brake to shut down.
● Acknowledged automatically once the cause of the shutdown has been rectified (initial
● Acknowledged automatically once the cause of the shutdown has been rectified (initial
status).
3.7.4
Outputs
Description
The motor starter can use the "outputs" function to control various actuators (e.g. indicator
lights, signal transmitters, or contactor relays).
With the M200D AS-i Basic, the output is active in the event of...
● Group faults (permanently assigned)
...and outputs a continuous signal.
The digital output is overload/short-circuit proof and is supplied from U
With the M200D AS-i Basic, the output is active in the event of...
● Group faults (permanently assigned)
...and outputs a continuous signal.
The digital output is overload/short-circuit proof and is supplied from U
AUX
.
NOTICE
Potential transfer
With AS-i, digital inputs must not be connected to digital outputs because this can establish
With AS-i, digital inputs must not be connected to digital outputs because this can establish
an impermissible connection between the U
AS-i
and U
AUX
voltages.