Garmin 4010 Manuale Utente

Configuring the Chartplotter

To change units of measure from the Home screen, select 

 > 

 > 

.

System Units—global setting that defines individual units of measure at the same time. Statute 

(mh, ft, ºF), Metric (kh, m, ºC), Nautical (kt, ft, ºF), or Custom. Select 

 to individually 

define units of measure for depth, temperature, distance, speed, elevation, volume, and pressure.

  NOtE: You must be receiving NMEA sonar depth data or using a Garmin sounder module to view 

depth and water temperature information.

Heading—sets the reference used in calculating heading information.

Auto Mag Var—Automatic Magnetic Variation automatically sets the magnetic declination for 

your location.
true—sets true north as the heading reference.
Grid—sets grid north as the heading reference (000º).
User Mag Var—allows you to set the magnetic variation value.

Position Format—change the coordinate style in which a given location reading appears. Do not 

change the position format unless you are using a map or chart that specifies a different position 

format.
Map Datum—change the coordinate system in which the map is structured. Do not change the Map 

Datum unless you are using a map or chart that specifies a different Map Datum.
time—set the time options.

time Format—select 12-hour, 24-hour, or UtC time format.
time Zone—set the time zone you want displayed for time readings.
Daylight Saving time—indicate whether you want daylight saving time Off, On, or Auto. The 

auto setting automatically turns daylight saving time on or off, depending on the time of year.

To change the communications settings from the Home screen, select 

> 

.

NMEA 0183 Setup—enable or disable NMEA 0183 output sentences for sounder, route, system, 

and Garmin NMEA settings.

Port types—configure the input/output format for each port to use when connecting your 

chartplotter to external NMEA devices, a computer, or other Garmin devices. NMEA Std. 

supports the input or output of standard NMEA 0183 data, DSC, and sonar NMEA input support 

for the DPT, MTW, and VHW sentences. NMEA High Speed supports the input or output of 

standard 0183 data for most AIS receivers. The Garmin option supports the input or output of 

Garmin-proprietary data for interfacing with Garmin software.
Posn. Precision—adjust the number of digits (two Digits, three Digits, or Four Digits) to the 

right of the decimal point for transmission of NMEA output.
Waypoint IDs—determine how the unit outputs waypoint identifiers (Names

or Numbers).

Defaults—reset NMEA 0183 settings to their default settings (OK

or Cancel).

Diagnostics—a tool used by installers to verify that NMEA 0183 data is being sent across the 

system.