Garmin 6208 Manuale Utente

Radar 

You must show the VRM and the EBL before you can adjust them (

).

The VRM and the EBL configured for one mode are applied to all other radar modes.
1.  From the Home screen, select 

.

2.  Select 

, 

, 

, or 

.

3.  Complete an action:

Select 

>

> 

 for Cruising, Harbor, or Offshore 

Mode.
Configure the setting for the short-range screen in Dual Range mode. Select 

 > 

 > 

> 

 for the GPSMAP 6000 series. Select 

 > 

> 

 for the GPSMAP 7000 series.

Configure the setting for the long-range screen in Dual Range mode. Select 

 > 

 > 

> 

 for the GPSMAP 6000 series. Select 

> 

> 

 for the GPSMAP 7000 series.

4.  Complete an action:

For the GPSMAP 6000 series, use the Rocker to adjust the diameter of the VRM and the 

angle of the EBL, so that the intersection point of the VRM and EBL is at the target location 
For the GPSMAP 7000 series, touch the target location.

The range and the bearing to the target location appear in the upper-left corner of the screen.

5.  Select 

.

1.  From the Home screen, select 

.

2.  Select a radar mode.
3.  Complete an action:

For the GPSMAP 6000 series, use the Rocker to select a location. 
For the GPSMAP 7000 series, touch a location. 

4.  Select 

.

You can show waypoints that are within the range shown on the Radar screen. This setting does not 

apply to the Radar Overlay.
1.  From the Home screen, select 

 > 

 > 

 > 

.

2.  Complete an action:

Select 

 to show all waypoints. 

Select 

 to show only waypoints associated with the currently active route.

•

•

•

•

•

•
•

•
•