Garmin 6208 Manuale Utente

Radar 

You can reduce the appearance of clutter caused by interference from another nearby radar source. 

On is the default value for the crosstalk setting.
Note: Depending upon the radar in use, the crosstalk setting configured for use in one radar mode 

may or may not be applied to other radar modes or to the Radar Overlay (

). 

1.  From the Home screen, select 

.

2.  Select 

, 

, 

, 

 or 

 mode.

3.  Complete an action:

Select 

 > 

 > 

>

 for Cruising, Harbor, Offshore, or Sentry 

mode.
Configure the setting for both screens in Dual Range mode. Select 

 > 

 > 

 > 

 > 

 for the GPSMAP 6000 series. Select 

>

 > 

 > 

 for the GPSMAP 7000 series.

Data bars can appear in all Radar modes, and they provide real-time, at-a-glance information. 
All data bars configured for use in one radar mode appear in every other radar mode. All data bars 

configured for use on the Radar Overlay appear only on the Radar Overlay, and must be configured 

separately.

The cruising data bar shows GPS speed, GPS heading, depth, and GPS position data.
1.  From the Home screen, select 

.

2.  Select 

, 

, or 

 mode.

3.  Select 

 > 

 > 

 > 

 > 

.

You should show the cruising data bar before you configure it (

).

The cruising data bar is divided into four sections, and each section appears in a different corner of 

the Radar screen. You can select the type of data that appears in each section of the data bar.
1.  From the Home screen, select 

.

2.  Select 

, 

, or 

 mode.

3.  Select 

 > 

 > 

 > 

> 

.

4.  Select 

.

5.  Select the type of data to appear in the top left section of the data bar.
6.  Repeat steps 4 and 5 for the 

, 

, and 

 sections of the data bar.

•

•