Garmin 695 Manuale Utente

190-00919-00  Rev. G

4

If you do not want to use the unit, but you would like to charge the battery, you can 

put the unit into Charge Mode.  Connect the unit to an external power supply.  Press 
and hold the POWER Button.  Instead of completely turning off, the unit now goes 
into Charge Mode.

Press and hold the POWER Button to turn the unit on or off.

NOTE: If the display appears dark or dim, adjust the display backlighting as 
necessary upon power up.  The GPSMAP 695/696 retains the backlighting 
settings between power cycles.  Backlighting may have been set to a level 
not suitable for the current ambient lighting.  For more information on display 
backlighting see section 1.4 (System Settings).

 The power button can be used to quickly set the backlight intensity.  A momentary 

press of the power button (after the unit is powered on) will display a window showing 
the current backlight setting.  From this window the backlight setting can be adjusted 
with the joystick knob, or a second momentary press of the power button changes the 
backlight level to full bright (10).

The first time the unit is turned on, the receiver must collect satellite data and 

establish its present location.  To ensure proper initialization, the GPSMAP 695/696 is 
shipped from the factory in AutoLocate mode, which allows the receiver to “find itself” 
anywhere in the world.