Garmin 7212 Manuale Utente
0
GPSMAP
®
6000/7000 Series Owner’s Manual
Sonar
Setting the Color Scheme
You can set the color scheme for all sonar screens.
1. From the Home screen, select
1. From the Home screen, select
Sonar
>
Sonar Setup
>
Appearance
.
2. Complete an action:
Select
Color Scheme
>
Blue
.
Select
Color Scheme
>
White
.
Adjusting the Gain on the Sonar Screen
You can control the sensitivity of the sonar receiver. To see more detail, increase the gain. If the
screen is cluttered, decrease the gain.
1. From the Home screen, select
1. From the Home screen, select
Sonar
.
2. Select a sonar view.
3. Select
3. Select
Menu
>
Gain
.
4. Complete an action:
Select
Auto
to allow the chartplotter to adjust the gain automatically.
Select
Up
or
Down
to increase or decrease the gain manually.
5. Select
Done
.
Adjusting the Noise Rejection on the Sonar Screen
The Noise Rejection setting appears only when you have manually increased or decreased the gain
setting (
).
You can minimize the appearance of weak sonar returns by increasing the noise rejection.
1. From the Home screen, select
1. From the Home screen, select
Sonar
.
2. Select a sonar view.
3. Select
3. Select
Menu
>
Noise Reject
.
4. Select
Up
or
Down
.
Selecting Frequencies
You can indicate which frequencies appear on the sonar screen when using a dual frequency
transducer. You can show data from a 200 kHz sonar signal, data from a 50 kHz sonar signal, or data
from both signals simultaneously.
1. From the Home screen, select
1. From the Home screen, select
Sonar
.
2. Select a sonar view.
3. Select
3. Select
Menu
>
Frequency
.
4. Complete an action:
Select
200 kHz
to show data from a 200 kHz sonar signal. This is useful mainly for more
shallow, inland waters.
Select
Select
50 kHz
to show data from a 50 kHz sonar signal. This is useful mainly for deeper
waters.
Select
Select
Dual
to show both 200 kHz and 50 kHz data.
•
•
•
•
•
•
•
•
•