Garmin 190-01155-00 Manuale Utente

Device Configuration 

1.  From the Home screen, select Configure > My Boat > Fuel Capacity.
2.  Enter the combined fuel capacity of all the engines on your boat.
3.  Select Done.

By default, all alarms are turned off, except the destination and weather alarms. The chartplotter must be on for 

the alarms to work.
NoTe: See the GPSMAP 700 Series XM WX Satellite Weather

®

 and XM Satellite Radio Supplement (North 

America only) for information concerning weather alarms.

You can set an alarm to sound when you are within a specified distance or time from a turn or a destination 

waypoint.
1.  From the Home screen, select Configure > Alarms > Navigation > Arrival.
2.  Complete an action:

•  Select Type, and indicate whether you want arrival alarms to sound only when nearing Destinations, or 

when nearing Destinations and Turns.

•  Select Activation, and indicate whether the arrival alarm triggers based on Time to arrival or based on 

Distance to arrival. 

•  Select Change Time (if Activation is set to Time) or Change Distance (if Activation is set to 

Distance) to indicate how long before arrival (in minutes) or how far before arrival (in units of 

distance) the alarm should sound. Enter the time or distance, and select Done.

You can set an alarm to sound when you exceed a specified drift distance while anchored.
1.  From the Home screen, select Configure > Alarms > Navigation > Anchor Drag > on.
2.  Enter the drift distance that triggers the alarm.
3.  Select Done.

You can set an alarm to sound when you are off course by a specified distance.
1.  From the Home screen, select Configure > Alarms > Navigation > off Course > on.
2.  Enter the off-course distance that triggers the alarm.
3.  Select Done.
System Alarms

You can set an alarm using the system (GPS) clock. 
1.  From the Home screen, select Configure > Alarms > System > Clock > on.
2.  Enter the time that triggers the alarm.
3.  Select Done.

You can set an alarm to sound when the battery reaches a specified low voltage.
1.  From the Home screen, select Configure > Alarms > System > Unit Voltage > on.
2.  Enter the voltage that triggers the alarm.
3.  Select Done.