Garmin 190-01155-00 Manuale Utente
60
GPSMAP 700 Series Owner’s Manual
Radar
Hiding the VRM and the EBL
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, or offshore.
3. Select Menu > Adjust VRM/eBL > Hide VRM/eBL.
2. Select Cruising, Harbor, or offshore.
3. Select Menu > Adjust VRM/eBL > Hide VRM/eBL.
Measuring the Range and Bearing to a Target Object while VRM and EBL are Hidden
If you have hidden VRM and EBL (
touching the screen.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, or offshore.
3. Touch a location.
4. Select Drop VRM/eBL.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, or offshore.
3. Touch a location.
4. Select Drop VRM/eBL.
Measuring the Distance to a Point on the Radar Screen
You can touch a point on the radar screen to display the distance and bearing of that location from your present
location in the upper-left corner of the screen.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, or offshore.
3. Touch a location on the screen.
4. Select Measure Distance.
5. If necessary, select Set Reference to measure from the selected location rather than your present location.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, or offshore.
3. Touch a location on the screen.
4. Select Measure Distance.
5. If necessary, select Set Reference to measure from the selected location rather than your present location.
Waypoints and Routes on the Radar Screen
Marking a Waypoint on the Radar Screen
1. From the Home screen, select Radar.
2. Select a radar mode.
3. Touch a location.
4. Select Create Waypoint.
Showing Waypoints on the Radar Screen
2. Select a radar mode.
3. Touch a location.
4. Select Create Waypoint.
Showing Waypoints on the Radar Screen
You can show waypoints that are within the range shown on the Radar screen. This setting does not apply to
the Radar Overlay.
1. From the Home screen, select Radar > Radar Setup > Appearance > Waypoints.
2. Complete an action:
1. From the Home screen, select Radar > Radar Setup > Appearance > Waypoints.
2. Complete an action:
• Select Show to show all waypoints.
• Select Navigation only to show only waypoints associated with the currently active route.
• Select Navigation only to show only waypoints associated with the currently active route.
Hiding Waypoints on the Radar Screen
You can hide waypoints that are within the range shown on the Radar screen.
From the Home screen, select Radar > Radar Setup > Appearance > Waypoints > Select Hide.
Navigating a Saved Route on the Radar Screen
Before you can browse a list of routes and navigate to one of them, you must record and save at least one route
(
1. From the Home screen, select Where To? > Routes.
2. Select a route.
3. Select Navigate To.
4. Complete an action:
2. Select a route.
3. Select Navigate To.
4. Complete an action:
• Select Forward to navigate the route from the starting point used when the route was created.
• Select Backward to navigate the route from the destination point used when the route was created.
• Select Backward to navigate the route from the destination point used when the route was created.
5. From the Home screen, select Radar.