Garmin 7015 Manuale Utente

Getting Started 

Press and release the   

 key. 

Press and hold the   

 key.

The first time you turn on the chartplotter, you must configure a series of initial settings. These 

settings must also be configured when restoring original factory settings (

settings can be updated later. Follow the on-screen directions.
Note: To calibrate the water speed, you must have a speed-capable transducer connected to a 

GSD

™

 22 or a NMEA 0183-capable water-speed sensor.

When you turn on the chartplotter, the GPS receiver must collect satellite data and establish the 

current location. When the chartplotter acquires satellite signals, the signal strength bars at the 

top of the Home screen are green 

. When the chartplotter loses satellite signals, the green bars 

disappear 

 and a flashing question mark appears on the boat icon on the chart screen.

For more information about GPS, visit the Garmin Web site at 

.

1.  From the Home screen, select 

 > 

 > 

> 

>

.

2.  Adjust the backlight:

Select 

to allow the chartplotter to adjust the backlight automatically, based on ambient 

light.
Select 

 or 

to adjust the backlight manually.

1.  From the Home screen, select 

 > 

 > 

> 

.

2.  Select 

, 

, or 

.

•

•