Garmin 7012 Manuale Utente

Pagina di 132
GPSMAP
®
 6000/7000 Series Owner’s Manual
Radar
Adjusting Rain Clutter on the Radar Screen
You can adjust the appearance of clutter caused by rain. Reducing the radar range also can minimize 
Setting
Description
FTC
This setting effects the appearance of large, hazy masses of clutter caused by rain at any 
distance.
Rain Clutter This setting effects the appearance of nearby rain clutter and targets more than it effects 
the appearance of distant rain clutter and targets. A higher rain clutter setting reduces 
the appearance of clutter caused by nearby rain, but it can also reduce or eliminate the 
appearance of nearby targets.
Note: Depending upon the radar in use, the rain clutter and FTC settings configured for use in one 
radar mode may or may not be applied to other radar modes or to the Radar Overlay (
). 
1.  From the Home screen, select 
Radar
.
2.  Select 
Cruising
Harbor
offshore
Dual Range
, or 
Sentry
 mode.
3.  Complete an action:
Select 
Menu
 > 
Noise Rejection
 > 
FtC
 for Cruising, Harbor, Offshore, or Sentry mode.
Configure the setting for both screens in Dual Range mode. Select 
 > 
Menu
 > 
Noise 
Rejection
 > 
FtC
 for the GPSMAP 6000 series. Select 
Left 
Noise Rejection
 > 
FtC
 for the 
GPSMAP 7000 series.
4.  Complete an action:
Select 
High
Medium
, or 
Low
 to decrease or increase the appearance of rain clutter, if using 
a GMR
 
20, 21, 40, 41, 18, 18 HD, 24, 24 HD, 404, or 406 radar. Other targets should remain 
clearly visible on the Radar screen. 
Select 
Up
 or 
Down
 to decrease or increase the appearance of rain clutter, if using a GMR 604 
xHD, 606 xHD, 1204 xHD, or 1206 xHD radar. Other targets should remain clearly visible on 
the Radar screen. If the FTC setting is greater than 50%, consider reducing the radar range.
5.  Complete an action:
Select 
Menu
 > 
Noise Rejection
 > 
Rain Clutter 
for Cruising, Harbor, Offshore, or Sentry 
mode. 
Configure the setting for the short-range screen in Dual Range mode. Select 
 > 
Menu
 > 
Noise Rejection
 > 
Rain Clutter 
for the GPSMAP 6000 series. Select 
Left 
>
 Noise Rejection
 
Rain Clutter 
for the GPSMAP 7000 series.
Configure the setting for the long-range screen in Dual Range mode. Select 
 > 
Menu
 
Noise Rejection
 > 
Rain Clutter 
for the GPSMAP 6000 series. Select 
Right 
>
 Noise 
Rejection
 > 
Rain Clutter
 for the GPSMAP 7000 series.
6.  Select 
Up
 or 
Down
 to decrease or increase the appearance of nearby rain clutter until other 
targets are clearly visible on the Radar screen. 
Clutter caused by rain may still be visible.