Garmin 720 Manuale Utente

Pagina di 100
GPSMAP 700 Series Owner’s Manual 
13
Charts and 3D Chart Views 
Target is lost. A green 
X indicates that the AIS transmission from the vessel is lost, and 
the chartplotter displays a message banner asking whether the vessel should continue to 
be tracked. If you discontinue vessel tracking, the lost target symbol disappears from the 
chart or the 3D chart view. 
Target is selected.
Heading and Projected Course of Activated AIS Targets
When heading and course over ground information are provided by an activated AIS target, the heading of the 
target appears on a chart as a solid line attached to the AIS target symbol. A heading line does not appear on a 
3D chart view.
The projected course of an activated AIS target appears as a dashed line on a chart or a 3D chart view. The 
length of the projected course line is based on the value of the projected heading setting (
activated AIS target is not transmitting speed information, or if the vessel is not moving, a projected course 
line does not appear. Changes in the speed, the course over ground, or the rate-of-turn information transmitted 
by the vessel can impact the calculation of the projected course line.
When course over ground, heading, and rate of turn information are provided by an activated AIS target 
, the 
projected course 
 of the target is calculated based on the course over ground and the rate of turn information. 
The direction in which the target is turning, which is also based on the rate of turn information, is indicated by 
the direction of the barb 
 at the end of the heading line 
. The length of the barb does not change.
Target with Projected Course, Heading, and Direction of Turn
When course over ground and heading 
 information are provided by an activated AIS target 
 but rate of 
turn information is not provided, the projected course 
 of the target is calculated based on the course over 
ground information. 
Target with Projected Course and Heading
Turning Off AIS Reception
AIS signal reception is turned on by default.
From the Home screen, select Configure > other Vessels > AIS > off.
All AIS functionality on all charts and on all 3D chart views is disabled. This includes AIS vessel targeting 
and tracking, collision alarms that result from AIS vessel targeting and tracking, and information about AIS 
vessels.