Infineon DDR3 2GB Memory Module IMSH2GU13A1F1C-10F Manuale Utente

IMSH[1G/2G][U/E]x3A1F1C(T)

DDR3 Unbuffered DIMM

Advance Internet Data Sheet

Rev. 0.65, 2008-12

4

03052008-R2G5-2FN2

1.2

Description

Qimonda IMSH[1G/2G][U/E]x3A1F1C(T) are Unbuffered
DIMM family with 30 mm height based on DDR3 SDRAM
technology. DIMMs are available non-ECC modules  in
128M

× 64 (1-GB), 256M × 64 (2-GB), and as ECC modules

in 128M

× 72 (1-GB), 256M × 72 (2-GB) organization and

density, intended for mounting into 240-pin connector
sockets.

The memory array is designed with 1Gb Double-Data-Rate-
Three (DDR3) Synchronous DRAMs.  De-coupling
capacitors, stub resistors, calibration resistors and
termination resistors are mounted on the PCB. The DIMMs
feature serial presence detect based on a 256 byte serial
EEPROM device using the 2-pin I

2

C protocol. The first

176 bytes are programmed with module specific SPD data.

IMSH1GU03A1F1C-10F 1GB 1R×8 PC3–8500U–7–10–A0

240-pin 1-GByte DDR3 Unbuffered DIMM with one rank for 
non-ECC applications. Each memory rank consists of eight 
DDR3 components in x8 organization. Standard reference 
card A is used on this assembly
Used DDR3 SDRAM Component
Product Type: IDSH1G-03A1F1C
Density: 1-Gbit
Organization: 128-Mbit × 8
Address Bits (Row/Column/Bank): 14/10/3

IMSH1GU03A1F1C-10G 1GB 1R×8 PC3–8500U–8–10–A0

IMSH1GU03A1F1C-13G 1GB 1R×8 PC3–10600U–8–10–A0

IMSH1GU03A1F1C-13H 1GB 1R×8 PC3–10600U–9–10–A0

IMSH2GU13A1F1C-10F 2GB 2R×8 PC3–8500U–7–10–B0

240-pin 2-GByte DDR3 Unbuffered DIMM with two ranks 
for non-ECC applications. Each memory rank consists of 
eight DDR3 components in x8 organization. Standard 
reference card B is used on this assembly
Used DDR3 SDRAM Component
Product Type: IDSH1G-03A1F1C
Density: 1-Gbit
Organization: 128-Mbit × 8
Address Bits (Row/Column/Bank): 14/10/3

IMSH2GU13A1F1C-10G 2GB 2R×8 PC3–8500U–8–10–B0

IMSH2GU13A1F1C-13G 2GB 2R×8 PC3–10600U–8–10–B0

IMSH2GU13A1F1C-13H 2GB 2R×8 PC3–10600U–9–10–B0