Chauvet C-640FC Manuale Utente
EN
Ovation™ C-640FC QRG
3
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100-240 VAC, 50/60 Hz.
voltage range of 100-240 VAC, 50/60 Hz.
Power Linking
You can link up to 9 Ovation™ C-640FC products at 120 VAC or
18 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
1.
Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and
rating.
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Ovation™ C-640FC will work with a DMX controller using a regular
DMX serial connection. A DMX Primer is available from
DMX serial connection. A DMX Primer is available from
DMX Connection
The Ovation™ C-640FC uses a regular DMX data connection for its DMX
personalities: TOUR, TR16, ARC.1, AR1.D, ARC.2, ARC.3, AR3.D, AR3.S,
PIX1, PIX3, PX16,and HSV. See the User Manual to connect and configure
for DMX operation.
personalities: TOUR, TR16, ARC.1, AR1.D, ARC.2, ARC.3, AR3.D, AR3.S,
PIX1, PIX3, PX16,and HSV. See the User Manual to connect and configure
for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16
personality, be sure that the dimming curve in SET > DIMX is set to OFF.
personality, be sure that the dimming curve in SET > DIMX is set to OFF.
Master/Slave
Connection
The Ovation™ C-640FC uses the DMX data connection for its Master/Slave
mode. See the User Manual to connect and configure for Master/Slave
operation.
mode. See the User Manual to connect and configure for Master/Slave
operation.