High End Systems 2.0.0-EN Manuale Utente
•
Manual: A manual cue can only be triggered by pressing the
Go
key. This
means the cuelist will stop until the
Go
key is pressed, irrespective of any wait,
follow or timecode triggers that later cues in the list may have.
Manual cues are useful because the word ‘Manual’ appears in the Cuelist win-
dow to remind the operator that they need to press the Go key. They are also
useful to prevent times being recorded into the Wait column when using Learn
Timing (p.213).
dow to remind the operator that they need to press the Go key. They are also
useful to prevent times being recorded into the Wait column when using Learn
Timing (p.213).
•
Clock: Triggers the cue when the specified real-world time and date is reached
on the Hog 4OS built in clock; see Clock Triggers (p.214).
on the Hog 4OS built in clock; see Clock Triggers (p.214).
13.4.1
Learn Timing
Learn Timing allows you to assign a cue's wait time value by manual executing the cues with
the Go key when the learn timing option is selected for the cuelist. If a timecode clock assigned
to that list is running when learn timing is enabled then the wait value recorded into the wait cell
will be a timecode value.
the Go key when the learn timing option is selected for the cuelist. If a timecode clock assigned
to that list is running when learn timing is enabled then the wait value recorded into the wait cell
will be a timecode value.
To use Learn Timing with timecode:
1.
Open
,
Choose
: open the Cuelist window of the required cuelist.
2.
Options
→
Cuelist Options
: open the Cuelist pane of the cuelist's Options
window.
3.
Select
Enable Timecode
, and choose a timecode source. Close the Options
window.
4.
In the Cuelist window, click
View Timecode
. The Timecode Toolbar will
open.
5.
If your timecode source is not currently running, click
Simulate
on the
Timecode Toolbar to have the console create a timecode source. Controls for
the timecode will appear.
the timecode will appear.
6.
In the Cuelist window, select
Learn Timing
.
7.
Start the timecode, and press the
Go
key when the timecode reaches the time
that you want each cue to go. A timecode frame value will appear in the Wait
cell for each cue.
cell for each cue.
8.
When you have finished, deselect
Learn Timing
.
Now when you run the timecode, the cues will be triggered when the timecode reaches each
cue's assigned frame. For more information on timecode, see MIDI timecode (p.312).
cue's assigned frame. For more information on timecode, see MIDI timecode (p.312).
To use Learn Timing without timecode:
1.
Open
,
Choose
: open the Cuelist window of the required cuelist.
2.
Ensure that
Enable Timecode
is not selected.
3.
Select
Learn Timing
.
213
High End Systems
Section 13: Timing