High End Systems 2.0.0-EN Manuale Utente
•
The total output of all fixtures' parameter values is shown in the Output window,
and the total output of all fixture's intensities is shown in the Levels View
window.
and the total output of all fixture's intensities is shown in the Levels View
window.
17.4.1
Control and Playback Toolbar Feedback
Playback Control LEDs
The LEDs of the playback controls give information about the cuelist's status:
•
Go key (Green): When solidly lit, this indicates that a fade is in progress. When
flashing it indicates that a fade has been paused.
flashing it indicates that a fade has been paused.
•
Halt/Back key (Red): When solidly lit, this indicates that this playback is
controlling parameters other than intensity. When flashing it indicates that its
control of those parameters has been overridden by other playbacks.
controlling parameters other than intensity. When flashing it indicates that its
control of those parameters has been overridden by other playbacks.
•
Flash key (Red): When solidly lit, this indicates that this playback is controlling
intensity. When flashing it indicates that its control of intensity has been over-
ridden by other playbacks.
intensity. When flashing it indicates that its control of intensity has been over-
ridden by other playbacks.
The Playback Bar
Figure 17.5. The Playback Bar
The Playback Bar is located at the bottom of the left touchscreen, giving feedback for each
master; see Figure 17.5, “The Playback Bar”. For each master, the Playback Bar displays the
following information:
master; see Figure 17.5, “The Playback Bar”. For each master, the Playback Bar displays the
following information:
•
If the master is empty, its number is shown. Console masters are numbered 1
to 10, while masters on playback wings are numbered 1/1 to 1/10 for the first
wing, 2/1 to 2/10 for the second wing, and so on.
to 10, while masters on playback wings are numbered 1/1 to 1/10 for the first
wing, 2/1 to 2/10 for the second wing, and so on.
•
The number and name of the cuelist. This is shown in blue if the master has
been held over after a page change; see Options When Changing Page
(p.290).The name and number will appear in lavender if the master is from a
template page; see The Template Page (p.296).
been held over after a page change; see Options When Changing Page
(p.290).The name and number will appear in lavender if the master is from a
template page; see The Template Page (p.296).
•
The current cue and its overall time. When the cue is running, it is displayed
in green text and the time counts down. If the cuelist has been released, then
in green text and the time counts down. If the cuelist has been released, then
....
is displayed, with the next cue shown below.
•
The next few cues and their times. If you want to see more cues, click and drag
the top of the Playback Bar upwards to make it larger.
the top of the Playback Bar upwards to make it larger.
•
The master level as a percentage. If the master is below 100%, then a red bar
appears indicating the level. It is possible for the position of the physical fader
appears indicating the level. It is possible for the position of the physical fader
269
High End Systems
Section 17: Playback