High End Systems 2.0.0-EN Manuale Utente
persist. You can also set this rate in the Cuelist Options window, and you can
set the default rate for new cuelists in
set the default rate for new cuelists in
Setup
→
Preferences
→
Cuelist
.
•
Using the Rate Wheel: The wheel located on the left hand side of the console
is known as the rate wheel. The rate wheel allows users to make temporary
modifications to the stored playback and effects rates for the chosen and selected
masters. To toggle the rate wheel mode (playback, effect, none) press the rate
key located below the rate wheel. The rate wheel's mode is displayed on the
main playback bar. Moving the rate wheel in the upward direction will increase
the selected rate while moving the wheel in the downward direction will
descrease the selected rate. To clear the rate wheel's modifications for the active
rate mode of the rate wheel press the restore key located above the rate thruster.
To permantently store the rate wheel's modifications hold the pig key and press
the restore key. Any rate thruster modifications that are not stored will be lost
when the master is released.
is known as the rate wheel. The rate wheel allows users to make temporary
modifications to the stored playback and effects rates for the chosen and selected
masters. To toggle the rate wheel mode (playback, effect, none) press the rate
key located below the rate wheel. The rate wheel's mode is displayed on the
main playback bar. Moving the rate wheel in the upward direction will increase
the selected rate while moving the wheel in the downward direction will
descrease the selected rate. To clear the rate wheel's modifications for the active
rate mode of the rate wheel press the restore key located above the rate thruster.
To permantently store the rate wheel's modifications hold the pig key and press
the restore key. Any rate thruster modifications that are not stored will be lost
when the master is released.
17.5.2
Scaling the size of Effects
You can scale the size of the effects controlled by a master (cuelist, scene, chase) by holding
choose and adjust the third encoder wheel. Changes made to a master's effects size are stored
and will persist. You can also set the effect size scaling in the Cuelist Options window, and you
can set the default effect size value for new cuelists and scenes in
choose and adjust the third encoder wheel. Changes made to a master's effects size are stored
and will persist. You can also set the effect size scaling in the Cuelist Options window, and you
can set the default effect size value for new cuelists and scenes in
Setup
→
Preferences
→
Cuelist
.
17.5.3
Manually Crossfading Cuelists
You can assign any cuelist to be operated manually, allowing you to perform the crossfades from
one cue to the next manually using the fader. Once a cuelist's Manual Fade option is selected,
the Master's fader will no longer control intensity but instead the crossfade progress of all para-
meters from the current cue to the next; starting when moved from any end stop, finishing when
the opposite end stop is reached.
one cue to the next manually using the fader. Once a cuelist's Manual Fade option is selected,
the Master's fader will no longer control intensity but instead the crossfade progress of all para-
meters from the current cue to the next; starting when moved from any end stop, finishing when
the opposite end stop is reached.
If you select Manual Fader mode when the fader is at 50%, a manual fade cannot take place until
the fader is moved to and then from an end stop, further moves from end stops will manually
work through the cuelist sequentially.
the fader is moved to and then from an end stop, further moves from end stops will manually
work through the cuelist sequentially.
To assign a cuelist's Manual Fade function:
1.
Open
+
Choose
→
Options
→
Master
2.
Select
Manual Crossfader
from the Fader menu:
275
High End Systems
Section 17: Playback