High End Systems 2.0.0-EN Manuale Utente
The Flash key
Options and Notes
Function
Disables the control
None
The Flash key brings the fixture intensities currently controlled by
the master to their full level, determined by the cuelist or scene on
the master. This is equivalent to momentarily bringing the fader to
full.
You can enter a percentage level for the Flash function. If this is less
than 100%, fixture intensities will be reduced in proportion when
the Flash key is pressed.
Press Go On Flash to go the master when the Flash key is pressed.
Press Release on Off to release the master when the Flash key is
released.
Press Solo to have the intensity outputs of all other masters taken
to zero when the Flash key is pressed.
If you select Latching, the action of the Flash key is maintained until
it is pressed a second time.
the master to their full level, determined by the cuelist or scene on
the master. This is equivalent to momentarily bringing the fader to
full.
You can enter a percentage level for the Flash function. If this is less
than 100%, fixture intensities will be reduced in proportion when
the Flash key is pressed.
Press Go On Flash to go the master when the Flash key is pressed.
Press Release on Off to release the master when the Flash key is
released.
Press Solo to have the intensity outputs of all other masters taken
to zero when the Flash key is pressed.
If you select Latching, the action of the Flash key is maintained until
it is pressed a second time.
Flash
17.8.2
Configuring the Main Controls
When you configure the main playback controls, the settings are part of the cuelist and will be
applied whenever you select the
applied whenever you select the
Choose
key for the master that the cuelist is on. The configur-
ation options for the main control keys are shown in the following table:
287
High End Systems
Section 17: Playback