High End Systems 2.0.0-EN Manuale Utente
20.2.4
Assigning MIDI Notes to Encoders and Wheels
To assign MIDI Note information to the console's encoders and wheels (not supported on Hog
4PC):
4PC):
1.
Connect a MIDI device to a MIDI input on either the console or a USB MIDI
input device connected to the console.
input device connected to the console.
2.
Setup
→
Network
: open the Network window.
3.
Select the console in the list.
4.
Settings
: open the Settings window
5.
Select the MIDI Notes tab of the Console Settings window.
6.
In the desired MIDI Channel assignment field, select Encoders to associate
encoder messages with that MIDI Channel.
encoder messages with that MIDI Channel.
Any incoming MIDI Note information for the specified MIDI channel will use the following
mappings for the associated encoders and wheels (not supported on Hog 4PC):
mappings for the associated encoders and wheels (not supported on Hog 4PC):
High End Systems
308
Section 20: MIDI