High End Systems 2.0.0-EN Manuale Utente
command line
A method of entering information into the Programmer, using the numer-
ical keypad and the @ button.
See Also programmer.
ical keypad and the @ button.
See Also programmer.
conversion curve
A curve that defines the relationship between the plotted parameter value
and the DMX value sent to the dimmer or fixture. Conversion curves are
like dimmer curves or profiles on other consoles, and should not be con-
fused with paths. Conversion curves are properties of the fixture, while
the path is a property of a cue.
See Also path .
and the DMX value sent to the dimmer or fixture. Conversion curves are
like dimmer curves or profiles on other consoles, and should not be con-
fused with paths. Conversion curves are properties of the fixture, while
the path is a property of a cue.
See Also path .
crossfade
A transition between two cues, one replacing the other.
cue
A look on stage, achieved through the manipulation of fixture parameters
recorded as part of a cue list. A cue requires a trigger, either manual or
automatic, and has attributes such as fade, wait and delay times.
See Also scene, fade time, wait time, delay time.
recorded as part of a cue list. A cue requires a trigger, either manual or
automatic, and has attributes such as fade, wait and delay times.
See Also scene, fade time, wait time, delay time.
cuelist
A group of cues that run in a specific order consecutively, or even simul-
taneously. These may be automatically linked to form a chase, or manually
triggered. A cuelist is run from a master.
taneously. These may be automatically linked to form a chase, or manually
triggered. A cuelist is run from a master.
D
dbo
dead black out
default value
A parameter value which has not been adjusted by the user. This value
is assigned by the fixture's Library, and may not always be zero. For ex-
ample, the default value of Shutter Open/Strobe Off may be Open.
See Also touched value, tracking.
is assigned by the fixture's Library, and may not always be zero. For ex-
ample, the default value of Shutter Open/Strobe Off may be Open.
See Also touched value, tracking.
delay time
desk channel
Single conventional lights that only have intensity control via a dimmer
are defined as desk channels by Hog 4OS. By contrast, automated lights
are referred to as fixtures.
are defined as desk channels by Hog 4OS. By contrast, automated lights
are referred to as fixtures.
DHCP
Dynamic Host Configuration Protocol is a way for a computer to ask a
master computer on a network to assign it an IP address when it connects.
Many existing networks are configured this way, and Hog 4OS supports
this system. You should talk to the administrator of the network you want
to connect to to find out more.
See Also ethernet, IP address.
master computer on a network to assign it an IP address when it connects.
Many existing networks are configured this way, and Hog 4OS supports
this system. You should talk to the administrator of the network you want
to connect to to find out more.
See Also ethernet, IP address.
dimmer curve
directory
A window which displays palettes, scenes or groups.
See Also palette.
See Also palette.
DMX
Short for DMX 512, DMX is the communications protocol most com-
monly used to connect lighting consoles to fixtures and dimmers.
monly used to connect lighting consoles to fixtures and dimmers.
High End Systems
442
Glossary