High End Systems 2.0.0-EN Manuale Utente
Section 3: Setting Up the System
3.1
Setting Up the Console
3.1.1
Starting Up the Console
To power on and start up the console plug one end of a standard IEC power cable into any 100-
220 VAC power source and plug the other end into the console's dedicated IEC power port and
then turn the power switch on the back of the console to the on position. Make sure that any ex-
ternal bootable media such as bootable USB flash drives or CDs are removed from the console
before booting as the console may try to boot to that media instead of to the installed operating
system. When the console has finishing booting you will see two windows: the Hog 4OS splash
screen and the Hog 4OS start screen. Your console is now ready for operation.
220 VAC power source and plug the other end into the console's dedicated IEC power port and
then turn the power switch on the back of the console to the on position. Make sure that any ex-
ternal bootable media such as bootable USB flash drives or CDs are removed from the console
before booting as the console may try to boot to that media instead of to the installed operating
system. When the console has finishing booting you will see two windows: the Hog 4OS splash
screen and the Hog 4OS start screen. Your console is now ready for operation.
»
Important
Using an ungrounded power source leads to a greater risk of shock and
may cause the motorized faders on the Hog 4 and Full Boar 4 consoles
to not function properly. Always make sure that the power source for
your console is properly grounded.
may cause the motorized faders on the Hog 4 and Full Boar 4 consoles
to not function properly. Always make sure that the power source for
your console is properly grounded.
51
High End Systems