High End Systems 2.0.0-EN Manuale Utente
3.
OK
: return to the Main screen.
3.2.2
Setting the Port Number
To assign the Port Number:
1.
Main
→
Network
: navigate to the Network Configuration screen.
2.
Assign the Port Number as required.
3.
OK
: return to the Main screen.
3.2.3
Setting IP Addresses for the HogNet Adapter on a DMX Processor
8000
8000
By default, DMX Processor 8000s are set to use DHCP to get an IP address automatically from
a Hog console. You can turn this off in the
a Hog console. You can turn this off in the
IP Config
screen:
1.
Main
→
Network
→
Console
→
Console Link Config
: navigate to the IP
Config screen.
2.
Set DHCP On or Off.
3.
OK
: return to the Console Link Status screen.
4.
Close
: return to the Network Configuration screen.
5.
OK
: return to the Main screen.
You may want to assign a fixed or ‘static’ IP address, perhaps if the Hog system is sharing a
network with non-lighting devices such as personal computers. You should contact your system
administrator to determine the optimum settings for your network.
network with non-lighting devices such as personal computers. You should contact your system
administrator to determine the optimum settings for your network.
To assign a static IP address:
1.
Main
→
Network
→
Console
→
Console Link Config
: navigate to the IP
Config screen.
2.
Set DHCP Off.
3.
Set the IP Address and Subnet Mask as required.
4.
OK
: return to the Console Link Status screen.
5.
Close
: return to the Network Configuration screen.
6.
OK
: return to the Main screen.
3.2.4
Setting the DMX Processor back to Defaults
In the Control Panel screen you can set the DP back to it's factory default settings:
•
Main
→
Control PanelSet to Defaults
.
61
High End Systems
Section 3: Setting Up the System