High End Systems 2.0.0-EN Manuale Utente
Figure 3.12. Docking Playback Bars with wings and external displays
To attach a Playback Wing:
1.
Apply AC power to the wing and connect the wing's USB port and DVI port
to the console.
to the console.
2.
Setup
→
Control Panel
→
Wings
: open the Wings pane of the Control
Panel window (see Figure 3.13, “The Wings pane of the Control Panel with
Playback Wing Mapping”).
Playback Wing Mapping”).
3.
Attach the wing to one of the playback bars by selecting the wing's unique ID
number in the drop down menu for that playback bar.
number in the drop down menu for that playback bar.
4.
If you have more than one wing, you can identify which is which by pressing
the
the
Beacon
button for the appropriate playback bar. The LEDs on the wing
will flash.
5.
Ensure that the playback bar is visible by selecting its
Display
button.
6.
Enable the external monitor included on the wing navigate to the Dispalys tab
of the control panel and enable the cordinating DVI output where you plugged
in the wing.
of the control panel and enable the cordinating DVI output where you plugged
in the wing.
NOTE: The Full Boar 4’s DVI-D monitor output connections do not support
analog output to VGA displays such as those featured on the older Full Boar
3 playback and programming wings.
analog output to VGA displays such as those featured on the older Full Boar
3 playback and programming wings.
83
High End Systems
Section 3: Setting Up the System