Broilmaster R3-1 Manuale Utente

B101623-5-1012

Page 34

Although the manufacturer has attempted to ensure that your grill will operate properly and satisfactorily, 

sometimes problems do arise.  The following troubleshooting guide lists several possible problems and 

their probable cause and solution.

Burner will not light.

Gas injector not inserted in venturi 

tube.

Realign/engage gas injector with 

the venturi tube.

Clogged gas injector.

Remove gas injector from gas con-

trol assembly and clean.

Obstruction in gas line.

For propane models, ensure gas 

valve on cylinder is OFF. Remove 

flexible hose and blow out any 

debris.

Spider webs in venturi tubes.

Clean venturi tubes. See Mainte-

nance Section.

Misalignment of collector box and 

burner.

Position electrode properly. Clean 

collector box.

Out of gas

Refill LP gas cylinder. If natural 

model, turn on gas at source.

Dead battery.

Replace with AA Alkaline battery.

Inadequate grill tem-

perature.

Poor combustion.

Adjust air shutter.

Misalignment of venturi tube and 

gas injector.

Realign/engage gas injector with 

the venturi tube.

Inadequate gas pressure.

Contact gas supplier for assistance.

Incorrect orifice/valve setting.

Refer to gas conversion instructions 

in this manual.

Flames blow out.

Cold grill.

Preheat grill at least 5 minutes on 

HI with the grill lid closed.

Misalignment of burner tube and 

gas injector.

Realign/engage gas injector with 

the burner tube.

Poor combustion.

Adjust air shutter.

Extreme wind.

Turn or shield grill.

Yellow flames.

Air shutter improperly set.

Open air shutter

Spider webs in venturi tubes.

Clean venturi tubes. See Mainte-

nance Section.

Seasoning salts on burner.

Clean by washing burner with mild 

detergent.

Oil film on burner.

Allow burner to operate on HI for 

10-15 minutes.