Broilmaster R3-1 Manuale Utente

B101623-5-1012

Page 42

1.  R3B Grills: Remove cooking grids, briquets and briquet rack 

from grill.

2.  Blue  Flame  Burner:  Remove  blue  flame  burner  shield  and 

blue flame burner from grill (one (1) 1/4-20 x 3/4 phillips screw 

for burner). 

See Figure 36. Infrared Burner: Remove ignitor 

wire, lugs and infrared burner from grill (one (1) 1/4-20 x 3/4 

phillips screw for each burner). 

3.  Remove  LP  burner  orifices  marked  1.25 mm  for  R3B.  Re-

move LP burner orifice marked 1.3 mm for R3. 

4.  Install natural gas burner orifice marked 49 into each orifice 

fitting. Apply pipe compound to threads on orifices prior to in-

stallation.

5.  Blue Flame Burner: Place burner shield and burners into 

grill  and  insert  burner  tubes  over  orifice  fittings.  Secure 

each burner with one (1) 1/4-20 x 3/4 phillips screw from 

Step 

2. 

      

Infrared Burner: Place infrared burners, ignitor, and lugs into 

grill and insert burner tubes over orifice fittings. Secure each 

burner with one (1) 1/4-20 x 3/4 phillips screw from step 2.

6.  Grasp valve knobs and remove from valves.

7.  The low input adjustment screws are located inside the two 

valve stems. Use a small screwdriver to turn each adjustment 

screw clockwise 1/4 turn (90 degrees). When valves are in 

the "OFF" position, the slot in the adjustment screw should be 

vertical. 

8.  Remove the hose and regulator from the gas connection on 

grill with adjustable wrench.

9.  Connect the grill to the natural gas supply. 

 

Attention:   Before lighting your grill check all gas con-

nections including the adjustment screws in valve stems 

for gas leaks with a soapy water mixture. 

 

Caution: Do not use the grill if a gas leak is detected until gas 

leak is corrected. If a gas leak can not be stopped, do not use 

grill. You must contact a qualified repair person.

10.  Push valve knobs onto valves.

11.  Apply the completed conversion label adjacent to the rating 

plate label on the grill.

LPG

NAT

ADJUSTMENT SCREW

ADJUSTMENT SCREW