Agilent Technologies 664xA Manuale Utente

 
 This command switches the interface between its SCPI (TMSL) command language and its compatibility language.  The
compatability language is provided for emulation of older power supply systems and is described in Appendix B. Sending
the command causes:
 

• 

The alternate language to become active and to be stored in nonvolatile memory.

• 

The power supply to reset to the state stored in Location 0.

 
 If the power supply is shut off, it will resume operation in the last-selected language when power is restored.
 
 

 

 

 

Parameter TMSL must be used in place of SCPI.

 

TMSL or last selected language.

 

 

 

<CRD>      TMSL | COMP

 

(None)

 
 This query returns the SCPI version number to which the power supply complies.  The returned value is of the form
YYYY.V, where YYYY represents the year and V is the revision number for that year.
 
 

 

(none)

 

 

 

(None)

 
 

 
 This subsystem controls remote triggering of the power supply.

 
 When the trigger subsystem is enabled, TRIG generates a trigger signal.  The trigger will then:
 
 1.

Initiate a pending level change as specified by CURR[:LEV]:TRIG or VOLT[:LEV]:TRIG.

 2.

Clear the WTG bit in the Status Operation Condition register.

 3.

If INIT:CONT has been given, the trigger subsystem is immediately re-enabled for subsequent triggers.  As soon as it

is cleared, the WTG bit is again set to 1.

 
 

 

(None)

 

 

(None)