Lg Electronics N2311AZ Manuale Utente

Selecting the Connect button initiates a PCoIP or 
RDP session depending on the session settings. 
While the PCoIP connection is pending, the OSD 
local GUI will display a "Connection Pending" 
message. When the connection is established, the 
OSD local GUI will disappear and be replaced by 
the session image.

Selecting the Options menu will produce a list of 
selections. The OSD Options menu contains:

y

y

y

y

A red "X" over the network icon indicates that 
either the network is not properly connected or that 
the connection is still being initialized (i.e. during 
portal boot up). Figure 2-2 shows the red "X" over 
the network icon indicating that the network is not 
ready.

Figure 2-3 shows the network icon when ready.

Figure 2-1. OSD Connect Screen

Figure 2-4. OSD Connect Screen (Connecting)

Figure 2-3. Network Ready (Detail)

The Connect screen is shown during start-up, 
except when the portal has been configured for a 
managed start-up or auto-reconnect. The logo dis-
played above the Connect button can be changed 
by uploading a replacement image via the admin 
interface. The network icon on the bottom right of 
the Connect screen shows the status of the net-
work connection. You must wait until the network 
icon is displayed as shown in Figure 2-3.

Selecting one of the options will produce a settings 
window.

Figure 2-2. Network Not Ready (Detail)

 

y

Menus and functions in PCoIP mode may be 
slightly different depending on the firmware 
version.The manual for each version can be 
downloaded from the Teradici website: http://
www.teradici.com.

 

y

For information on how to check the firmware 
version,See p.39.