Lexicon MC-1 Manuale Utente

Pagina di 67
51
MC-1 Digital Controller
DTS Effects and Parameters
Parameter
Initial Value
Range
CENTER MIX
16
0-30
SURROUND MIX
+2dB
-5 to +5dB
CENTER DLY SAMPLES
+0
-127 to +127
MASTER LEVEL
+5dB
-5dB to +5dB
LFE MIX LEVEL
+0.0dB
-20.0dB to +0.0dB
SUBWOOFER LVL
+00dB
OFF, -30dB to +05dB
CUSTOM
DTS Effects are compatible with DTS Digital Surround input signals.
Any DTS-capable software and/or source components should be
labeled with a logo, similar to the one on the MC-1 front panel.
DTS 2-Channel
This Effect mixes DTS Digital 5.1 information for two-channel playback.
These soundtracks can be recorded onto two-channel formats, or
played back through left and right front speakers. The mix is designed
to play back with full surround when decoded through Logic  7. In mixing
a film with very heavy use of the Low Frequency Effects Channel, it may
be desirable to lower LFE MIX LEVEL.
Parameter
Initial Value
Range
RE-EQUALIZER
OFF
ON, OFF
BASS ENHANCE
OFF
ON, OFF
REAR DLY OFFSET
+5ms
0-20ms
SIDE LEVEL
+00dB
OFF, -30dB to +05dB
REAR LEVEL
+00dB
OFF, -30dB to +05dB
LFE MIX LEVEL
-10.0dB
-20.0dB to +0.0dB
SUBWOOFER LVL
+00dB
OFF, -30dB to +05dB
CUSTOM
DTS Music
This Effect enhances playback of DTS music recordings, or DTS film
soundtracks with strong musical content. This effect contains many of
the features found in DTS LOGIC 7, with settings that are more
appropriate for music.
5
DTS Effects and Parameters