Panasonic SC-BTT465 Manuale Utente

VQT5F60

By using the Bluetooth

®

 connection, you can 

listen to the sound from the Bluetooth

®

 device 

wirelessly.
Refer to the owner’s manual of the Bluetooth

®

 

device for details.
≥ If you intend to use an NFC (Near Field 

Communication)-compatible Bluetooth

®

 device, 

proceed to “One-Touch Connection 
(Connecting by NFC)”.

Press [ ].
≥ If “Panasonic BTT” is displayed on the 

Bluetooth

®

 menu of the device, go to step 4.

Press and hold [jPAIRING].
≥ “PAIrInG” will be displayed on the unit’s 

display and the unit will enter pairing 
standby mode.

≥ If another Bluetooth

®

 device is already 

connected, the connection will be 
terminated automatically.

≥ If another Bluetooth

®

 device is already 

connected, disconnect it.

≥ “ConnECtEd” will be displayed on the unit’s 

display and the connection will be 
established.

≥ If prompted for the passkey, input “0000”.

≥ You can register up to 8 devices with this system. If a 9th 

device is paired, one of the other registered devices will be 

replaced.

≥ This system can only be connected to one device at a time.

≥ When “Bluetooth” is selected as the source, this system 

will automatically try and connect to the last connected 

Bluetooth

®

 device. If the connection attempt fails, try to 

establish a connection again.

≥ If you switch the source, the Bluetooth

®

 device will be 

disconnected.

≥ If the image and sound are out of sync during playback, 

restart the playback application you are using. If the 

problem persists, connect the Bluetooth

®

 device and this 

unit with an audio cable.

≥ “Bluetooth Standby Mode” (> 31)

Simply by touching an NFC-compatible 
Bluetooth

®

 device on the unit, you can complete 

all preparations, from registering a Bluetooth

®

 

device to establishing a connection.

Touch and hold your device on the NFC 
touch area of this unit. (> 10)
≥ If the unit is in standby, it will turn on, and 

“nFC” will be displayed on the unit’s display. 
Keep the device in contact with the unit.

≥ When the Bluetooth

®

 device is paired and 

connected, “ConnECtEd” is displayed on 
the unit’s display. Once the registration and 
connection of the Bluetooth

®

 device is 

complete, move the device away from the 
unit.

≥ If “ConnECtEd” is not displayed, change the 

touching position.

≥ When the connection is established, the playback may 

start automatically depending on the type of device being 

used.

≥ The One-Touch Connection may not work properly 

depending on the type of device being used.

PAIRING

CONNECTED

SC-BTT466&465&405P-VQT5F60_mst.book  21 ページ  ２０１４年３月２４日　月曜日　午前１１時３１分