3com WX4400 3CRWX440095A Manuale Utente
88
C
HAPTER
4: P
ORT
C
OMMANDS
ap-number
— Number for the Distributed MAP. The range of valid
connection numbers depends on the WX switch model:
For a WX4400, you can specify a number from 1 to 256.
For a WX1200, you can specify a number from 1 to 30.
serial-id serial-ID
— MAP access point serial ID. The serial ID is
listed on the MAP case. To show the serial ID using the CLI, use the
display version details command.
display version details command.
radiotype 11a | 11b| 11g
— Radio type:
11a
— 802.11a
11b
— 802.11b
11g
— 802.11g
This option applies only to single-radio models.
Defaults — The default values are the same as the defaults for the
set port type ap command.
set port type ap command.
Access — Enabled.
History — Introduced in MSS Version 3.0. New values for model option
added in Version 4.1:
added in Version 4.1:
AP3750
AP2750
mp-620
Version 6.0 renamed the dap command to ap.
Examples — The following command configures Distributed MAP 1 for
MAP model AP2750 with serial-ID M9DE48B012F00:
MAP model AP2750 with serial-ID M9DE48B012F00:
WX4400# set ap 1 serial-id M9DE48B012F00 model ap2750
success: change accepted.
The following command removes Distributed MAP 1:
WX4400# clear ap 1
This will clear specified AP devices.
Would you like to continue? (y/n) [n]y