Polycom 7000 Manuale Utente
System Management and Maintenance
Polycom, Inc.
400
e Log back in and, in a two-server cluster, verify on the Dashboard that both servers are up and
the private network connection is operating properly.
f
Go to Maintenance > Software Upgrade and check the Operation History table.
g If the upgrade requires a new license activation key code or codes, obtain and install them as
described in
.
5 Log into one of the other clusters (let’s call it cluster B) and do the following:
a Go to Maintenance > Software Upgrade.
b In the Actions list, click Upgrade.
b In the Actions list, click Upgrade.
A confirmation dialog appears.
c Click Yes.
If a restart is required, a dialog informs you that the upgrade is starting. Shortly after that, the
system logs you out and restarts.
d Click OK to log out immediately, or simply wait.
When the upgrade process is finished, in a two-server Appliance Edition system cluster, both
servers’ LCDs display DMA Clustered (in a single-server system, the LCD displays DMA
Ready), and you’re able to log back in.
e Log back in and, in a two-server cluster, verify on the Dashboard that both servers are up and
the private network connection is operating properly.
f
Go to Maintenance > Software Upgrade and check the Operation History table.
g If the upgrade requires a new license activation key code or codes, obtain and install them as
described in
.
h Go to Network > DMAs and join this cluster to cluster A to create a supercluster.
You now have a new supercluster consisting of two upgraded clusters.
6 For each additional cluster, repeat step
of this procedure to upgrade it and add it to the new
supercluster.
7 On any cluster of the new supercluster, do the following:
a Go to Network > Site Topology > Territories and restore the territory assignments that you
recorded at step
of this procedure. Or, if previously integrated with a Polycom RealPresence
Resource Manager system, go to Admin > Integrations > RealPresence Resource Manager
and reestablish the integration.
Integration with a resource management system imports the site topology data, including territory
Integration with a resource management system imports the site topology data, including territory
assignments, from that system.
b Go to Network > DMAs and return each cluster to service.
c Verify, and restore or update if necessary, other supercluster configuration settings.
You should now have a fully functional upgraded supercluster.
c Verify, and restore or update if necessary, other supercluster configuration settings.
You should now have a fully functional upgraded supercluster.
8 Call Polycom Global Services if, for any cluster:
After waiting significantly longer than the estimated install time, you’re still unable to log back in.
You can log in, but the Dashboard shows only one server for a two-server cluster.
Note: Restart your browser
You may need to restart your browser or flush your browser cache in order to log back into the system.
You may need to restart your browser or flush your browser cache in order to log back into the system.