Mitsubishi Electronics E68 Manuale Utente
2. MACHINING
PARAMETERS
2.5
Tool Measurement Parameters
II - 15
2.5 Tool Measurement Parameters
Set up the parameter of the tool (touch tool sensor), etc, used for measurement.
#
Item
Contents
Setup range (unit)
8701 Tool length
Set the length to the end of the touch tool.
±99999.999 (mm)
8702 Tool Dia
Set the spherical diameter of the touch tool
end.
end.
±99999.999 (mm)
8703 OFFSET X
Set the spindle center deviation amount from
the touch tool center in the X axis direction.
the touch tool center in the X axis direction.
±99999.999 (mm)
8704
Y
Set the spindle center deviation amount from
the touch tool center in the Y axis direction.
the touch tool center in the Y axis direction.
±99999.999 (mm)
8705 RETURN
Set the return distance to contact the touch tool
against the workpiece again.
against the workpiece again.
±99999.999 (mm)
8706 FEED
Set the feedrate when contacting the touch
tool against the workpiece again.
tool against the workpiece again.
1 to 60000 (mm/min)