Panasonic AG-HMR10P Manuale Utente
76
Screen displays (continued)
C
■
CANNOT BE USED DUE TO
INCOMPATIBLE DATA.
INCOMPATIBLE DATA.
Cannot be used because the data standard is
different.
•
The format of the SD Memory Card does not
match the [SYSTEM FREQ] setting.
match the [SYSTEM FREQ] setting.
CANNOT DELETE.
Deletion is not possible.
CANNOT DELETE WITH THIS BUTTON
Deletion is not possible with this button.
CANNOT OPERATE.
FAN MOTOR IS STOP.
PLEASE TURN OFF.
FAN MOTOR IS STOP.
PLEASE TURN OFF.
• Displayed when an abnormality is detected in the
cooling fan of the camera head.
CANNOT OPERATE.
TEMPERATURE IS HIGH.
PLEASE TURN OFF AND WAIT A WHILE.
TEMPERATURE IS HIGH.
PLEASE TURN OFF AND WAIT A WHILE.
• Displayed when an abnormally high temperature
is detected in the camera head.
CANNOT PLAY.
Playback is not possible.
CANNOT PLAY WITH THIS BUTTON
Playback is not possible.
CANNOT RECORD PH MODE AND
HA MODE INTO THIS CARD.
HA MODE INTO THIS CARD.
Recording on this card is not possible in PH mode
or HA mode.
CANNOT RECORD.
THE NUMBER OF CLIPS HAS
EXCEEDED THE MAXIMUM LIMIT.
THE NUMBER OF CLIPS HAS
EXCEEDED THE MAXIMUM LIMIT.
The maximum number of clips has been reached
and no further clips can be recorded.
CANNOT SET
THE NUMBER OF INDEXES HAS
EXCEEDED THE MAXIMUM LIMIT.
THE NUMBER OF INDEXES HAS
EXCEEDED THE MAXIMUM LIMIT.
No further indexes can be set because the
number of indexes will exceed the maximum limit.
CANNOT SET PRE-REC,
CARD CAPACITY TOO LOW.
CARD CAPACITY TOO LOW.
PRE REC cannot be set because the remaining
card capacity is too low.
card capacity is too low.
CARD DOOR OPENED.
The card door is open.
CARD ERROR.
PLEASE REFORMAT.
PLEASE REFORMAT.
Formatting has failed. The card needs to be
reformatted.
CARD FULL.
The card is full.
CHECK CARD.
Check the card.
CHECK USB CABLE.
Connect a PC.
CONTROL DATA ERROR
HAS BEEN DETECTED.
HAS BEEN DETECTED.
An error has been detected in the control
information.
D
■
DISCONNECT USB CABLE.
When switching from one mode to another,
disconnect the USB cable.
I
■
INCOMPATIBLE CARD.
PLEASE CHECK CARD.
PLEASE CHECK CARD.
Recording may not be successful with this card.
Check the card.
INVALID KEY INPUT
• Displayed when a button is operated during key
lock. (Page 46)
N
■
NO CARD
No card is inserted.
NOW ACCESSING.
PLEASE DO NOT REMOVE CARD.
PLEASE DO NOT REMOVE CARD.
Card is currently being accessed. Do not remove
the card.
Main warning displays
The main warning displays that appear on the LCD monitor screen are listed below. If a warning display is
not listed here, check it carefully when it is displayed.
not listed here, check it carefully when it is displayed.