Q-Logic 8100 Manuale Utente
6–iSCSI Noninteractive Commands
-sbootcode (Set Secondary Boot Target Information)
-sbootcode (Set Secondary Boot Target Information)
6-24
SN0054667-00 C
-sbootcode
(Set Secondary Boot Target Information)
To set the secondary boot target and LUN, issue the -sbootcode command as
follows:
-sbootcode <hba_port_inst> <Boot Target> <Boot LUN>
Issuing this command saves the configuration data to an XML file portable to all
platforms supported by iSCSI. This command is not active for PPC.
platforms supported by iSCSI. This command is not active for PPC.
For primary boot code, see
.
-sbootcodecid
(Set Alternative Client ID)
To set the alternative client ID (seven characters maximum), issue the
-sbootcodecid command as follows:
-sbootcodecid command as follows:
-sbootcodecid <hba_port_inst> <Alternative Client ID>
This command is not active for the PPC.
-sdmrc
To return the SDM library return code, issue the -sdmrc command as follows:
-sdmrc [Simple_Pattern]
When [
simple pattern
]
is given, only the lines containing that string are
printed.
-stadd
To add a send target for discovery, issue the -stadd command as follows:
-stadd
-stadd
<hba_port_inst> <ip address> [chapIndex] [<TGBCA> <value>]
Where <value> can be on or off; on causes the send target login to require
bidirectional CHAP.